Warewashing green&clean dual rinse rack type dishwasher, 150 racks/hour, electric, 50Hz (Marine) (COD 535126)
Where to buy
Warewashinggreen&clean dual rinse rack type dishwasher, 150 racks/hour, electric, 50Hz (Marine)
Dual Rinse Rack Type dishwashers - 150 racks per hour

Warewashing
green&clean dual rinse rack type dishwasher, 150 racks/hour, electric, 50Hz (Marine)

COD 535126

Dual rinse rack type dishwasher, 150 racks/hour, CLEAR BLUE Filtering System, electric, touch screen, customized direction on-site, USPH compliant, 50Hz - Marine

Where to buy

Specifications

  • Supply voltage: 400 V/3 ph/50 Hz

    Default Installed Power: 42 kW

    Electrical power min: 22 kW

    When the machine is run at DIN 10510 compliant speed.

    Boiler heating elements: 20 kW

    Wash pump size: 1,2 kW

    Wash tank heating elements: 20 kW

  • Inlet hot water line size: G 3/4"

    Drain line size: 50mm

    Inlet water supply pressure: 1.5-6 bar

    Inlet water supply temperature (wash and rinse): 50 - 65°C

    Inlet water supply hardness: 14 °fH / 8°dH

    When below 7°fH/4°dH special detergent and rinse aid are needed.

    Peak rate of drain flow: 2.5 l/s

    Wash tank size: 70 l

    Rinse water consumption: 180 l/h

  • Productivity per hour (max. speed): 150 racks/2700dishes

    Productivity per hour (medium speed): 114 racks/2052 dishes

    Productivity per hour (DIN compliant speed): 82 racks/1476 dishes

    Wash Temperature: 71 - 76 °C

    Final rinse temperature: 86 °C

    External dimensions, Width: 1320 mm

    External dimensions, Depth: 925 mm

    For transportation purpose only, the depth can be reduced to either 895mm by removing the main switch button or 797mm by removing the control box and the door handle.

    External dimensions, Height: 1785 mm

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Charging hole size (height): 490 mm

    Shipping height: 1950 mm

    Shipping width: 1010 mm

    Shipping depth: 1260 mm

    Shipping volume: 2.48 m³

    Reference norm used to measure the noise: IEC60335-2-58 annex AA.

    Table to table distance: 1120 mm

  • Noise level: <62 dBA

  • Air flow (entrance, exit): 107 / 107 m³/h

    Air temperature: 45 °C

    Air humidity (entrance, exit): 100 / 100 % r.h.

    The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.

    Latent heat: 9100 W

    Sensible heat: 3400 W

    This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".

Product Features

IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
Adjustable feet for full access underneath the machine for cleaning.
CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.
Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
USPH performance compliant.
Maximum capacity per hour of 150 racks easy to switch to DIN 10510 compliant or other speed.
The unit is ready to be connected with OnE Connectivity for 24/7 real time monitoring, increasing equipment uptime, maximum profit and optimizing your process.
Three conveyor speeds can be selected through the control panel by the operator and customized on-site.
Large counter balanced inspection door allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
Automatic drain, clean and sanitize cycles featured as standard. The internal chamber, is completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
Dual rinse technology ensures maximum rinse water covering every corner of the rack inside the rinse area for perfect hygiene on washed wares.
The unit is designed for marine application as components is easily accessible from front for service and maintenance without removing the machine.
The unit is built on modularity concept for easy to add pre-wash and dryer modules on-site.
The feeding direction is right to left as pre-arrangement from the factory, but it can be simply reversed on-site to left to right.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.
Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.

Complete the form below to request more information

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

ประเทศไทย

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×